Mosaic decorative stepping stone handicraft dish itself

Look at this great idea for mosaic stepping stones to create your own. You can easily and quickly enough wonderful springboard with decorative mosaic for the garden path or simply as decoration crafts. The idea can be implemented by using a stove. Read the steps and try it myself beautiful and unique jumps with round shape to create the garden.

Mosaic stepping stones to make your own – use materials

This allows you to tinker with the success mosaic stepping stones, you will need the following information: round baking pan that is not jammed, Vaseline, adhesive film old china plates, decorative glass stones, concrete, enameled wire, metal safety glasses, gloves rubber, face or dust mask, hammer, buckets, squeegees and water.

Get designs for cutting mosaic stepping stones

Then, you can customize the particle jumps mosaic mosaic, leave old china plates and cups with a hammer, cut into small pieces. Be careful to avoid cuts.

Determine the turn

Take the round mold and place it on the adhesive film. Then draw with a pencil around the shape of the pan so you have the exact size printed on the film. Then cut the circle and place it on the bottom of the pan.

Have mosaic pattern

After the film with the adhesive into the pan, arrange the small particles of decoration on it in a certain pattern of customization. Be sure to leave enough space between the various parties. This is particularly important for the milestones mosaic finish with a nice structure.

Stir the mass of cement

The next step is to mix the concrete mix according to directions. Follow. Exactly the instructions on the package and use the bucket and gloves

Add a stable structure

Cut a rectangular piece of wire. This will then serve as a stable structure to the concrete mix.

Fill the pan

Before starting the compilation, the anointing llauf some Vaseline inside of the pan, so that the concrete easier to get out later. Then fill the inside of the module with the concrete mixture with a spatula and gloves. Spread a layer and rectangular wire to the inside. Then covered with a further layer of concrete. Smooth the surface with a spatula. Allow the concrete to dry for two days.

Last great work complete

After the mixture of concrete has dried, you can activate the cooking stove. The content should come out easily. Remove the protective sheet and cover with a coat of paint as you want gently.